Apple II Technical Notes _____________________________________________________________________________ Developer Technical Support Apple IIGS #9: IIGS Sound Expansion Connector: Analog Input/Output Impedances Revised by: Jim Merritt & Jim Mensch November 1988 Written by: Jim Merritt December 1986 This Technical Note discusses the impedances of the analog signal pins on the IIGS sound expansion connector since an interface to this connector must take the impedance of the pins into account to function properly. _____________________________________________________________________________ The analog output impedance of pin 3 depends upon the characteristics of the 5503 sound synthesis chip in any particular IIGS machine. Across systems, this impedance may range from 4.5 K ohms to 9 K ohms. Pin 1, the A/D input, presents a dynamic load to the source, drawing at 10 K ohms for approximately 500 ns during every sample period. It is reasonable, however, to treat the input pin as if it presents a continuous load of 10 K ohms without compromising the interface or the fidelity of the input sample. Consult the Apple IIGS Hardware Reference for further technical information about the Ensoniq 5503 sound synthesis chip used in the IIGS. Further Reference o Apple IIGS Hardware Reference