In article , Wayne Stewart wrote: > >There was a bit of discussion on Mac groups about this keyboard a while >back. The reset key starts a Mac by shorting the 5 volt to ground. The >reciever has a passthrough connector so solution on Macs is to make a >device with a short piece of ADB cable that has a button to short those >pins. This doesn't seem work as a substitute for the reset key on the >IIgs as holding down the Control and Apple keys while shorting those to >pins apears to do nothing. You need to short Pin 2 (reserved) to ground (Pin 4), not Pin 3 (+5v) to Pin 4. However, it is not certain that this will work on the IIgs, as the key sends a keycode as well as shorting pin 3.