Subject: Re: modem woes From: Rubywand Date: Mon, Sep 14, 1998 2Ç41(H Message-id: <35FCE4C8.21A82DC1@swbell.net> Adalbert Goertz writes ... > > Hi: > I like to use a ZOOM V32bis faxmodem with my //GS (14.4k). > It logs on ok, but then sits, nothing happens. > The bbs doesnt ask for my id. I dont have this problem with my > regular Hayes smartmodem. > Is there any special init string for a faxmodem which would > make the bbs ask for my id? > This happens with all bbs I try to log on. .... One follow-up idea on woes-- have you checked that you have a correctly wired "Hi-speed hand-shaking modem cable"? According to the Spectrum manual and the manual for ProTERM 3.1, the correct wiring for the Hi-Speed cable is ... Male Mini-Din 8 RS-232 Male DB-25 6 7 8 01 02 03 04 05 06 07 08 09 10 11 12 13 3 4 5 14 15 16 17 18 19 20 21 22 23 24 25 1 2 (View is looking into the cable connector/plug at the pins.) Mini DIN-8 DB-25 Signal Discription 3 2 TD (Transmit Data) 5 3 RD (Receive Data) 4,8 7 GND (Ground) 2 5 CTS (Clear to Send) 1 4,20 RTS (4= Ready to Send; 20= DTR= Data Term Rdy) 7 8 DCD (Data Carrier Dectect) The Spectrum manual has a note which says that some cables swap connections to pins 2 and 7 on the Mini-DIN-8 plug. Such a cable requires using an alternate port driver with Spectrum. My guess is that a cable with connections to pins 2 and 7 swapped would not work correctly with ProTERM's usual driver, either. Rubywand