AppleWorks
J
__________________________________________________________________
Problems With Output Wider Than 80 Columns
__________________________________________________________________
Some users report difficulty printing AppleWorks files when lines 
in the file are greater than 80 characters long.  This happens 
because the interface card adds a Carriage Return and Line Feed 
after 80 columns.

 

To eliminate this problem:

 

  1. Select the change printer specifications section of 
AppleWorks.

  2. Select the desired printer and choose "6.  Printer Codes".

  3. Choose Characters per inch.

  4. Select the spacing you want to set.

       a. If the command to set your printer to 15 CPI is 
<Escape>Q,

          type <Control>I120N<Escape>Q. (Keep in mind that 
<Control>I means to hold the Control key down and press the I key, 
and <Escape> means press the key marked Escape).

       b. The same setup will work for 17 CPI if 120 is replaced 
with 136

          (<Control>I136N<Escape>Q).