AppleWorks
J
__________________________________________________________________
AppleWorks and 10 CPI on LaserWriter
__________________________________________________________________
If documents printed to a LaserWriter from AppleWorks contain 
extra, unwanted line spaces, some adjustments must be made.

The Diablo emulation mode command string uses :  Escape, 
CTRL-Underscore, CTRL-M

for 10 characters per inch.  This code sets the LaserWriter to 10 
CPI, but, since the Super Serial Card firmware includes a Line 
Feed as it picks up the CTRL-M, it adds a line feed to each line.  
Thus, single spaced text is printed double spaced, double spaced 
text is printed triple spaced, etc., making single spacing in 10 
characters per inch impossible.

 

In order to fix this problem, set AppleWorks to insert the line 
feeds and configure the serial card NOT to add line feeds by 
setting switch SW2-5 to OFF. For the built-in serial port of an 
Apple IIGS, use the Control Panel;  for the printer port of the 
Apple IIc, use the Apple IIc System Utilities.